Driveshaft & Axles

Touge Factory

TF 240sx to 350Z Z33 Axle Adapters

Tired of breaking axles on your 240sx?A solution to this is adapting the beefier 350Z axles to your 240sx.350Z axles are Ball/Cage design (Rzeppa), which are a stronger design and able to handle much higher horsepower and abuse.Your 240sx stubs will need...

Touge Factory

Nissan 240sx S13 / S14 Aluminum Driveshaft - SR20DET + 350Z CD009 Trans

This is for SR20DET's with CD009 Trans swap only. Most 240sx have the center driveshaft carrier bearing shot and will move under load.This will cause vibration and knocking noise.  3" Aluminum 1-piece driveshaft eliminates the need for a bearing...

Touge Factory

Nissan 240sx S13 / S14 Aluminum Driveshaft - SR20DET / KA24DE / RB25DET

Most 240sx have the center driveshaft carrier bearing shot and will move under load.This will cause vibration and knocking noise.  Aluminum 1-piece driveshaft eliminates the need for a bearing completely, and also reduce overall mass on the...

Touge Factory

Axle Bolt Set for the 240sx to Z33 Axle Adapters

240sx to Z33 axle adapter requires a slightly longer axle bolts.This is a complete set, which includes:12 x 19mm Flange Lock Nut with Serrations12 x Lock Washers12 x JIS Class 10.9 Hex Flange Bolts

Driveshaft Shop

Driveshaft Shop Steel Driveshaft - Non-ABS - Nissan S14 w/ S15 6Spd

This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A...

Driveshaft Shop

Driveshaft Shop Aluminum Driveshaft - Non-ABS - Nissan S14 w/ S15 6Spd

S14 Non-ABS with S15 6-Speed Aluminum Shaft. This is our single shaft conversion for the 240SX platform. This is a complete 6061-T6 aluminum shaft that is about 1/2 the weight of the factory 2-piece. The shaft features larger, replaceable and...

Megan Racing

Megan Racing 5 Lug Hub Conversion Kit Nissan 240SX S14 Rear

Nissan 240SX/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally...

Ichiba

Ichiba Rear 5 Lug Hub Conversion - Nissan 240SX S13 & S14

Reliable and close to OEM quality hubs.   Introducing the Ichiba 5 lug conversion hub for Nissan 240SX S13 89-99.Temperatures on the hub during street driving can reach 120 degrees, and while at the track can get up to 150 degrees, our 5 lug...

Driveshaft Shop

Driveshaft Shop NISSAN S13 / S14 240SX 600HP Complete Axle w/6-Bolt Inner

This is the 600HP Level 2.9 system for the S13 and S14 platform. The Level 2.9 axles feature an outer CV that is a ball & cage type, a great improvement over the 240SX factory tripod style CV, our high-grade aircraft quality torsional center bars...

Driveshaft Shop NISSAN S14 with KA24 SR20 (5-Speed) Non-ABS Aluminum driveshaft

Product Description S14 Non-ABS with KA24/SR20 5-Speed Aluminum Shaft. This is our single shaft conversion for the 240SX platform. This is a complete 6061-T6 aluminum shaft that is about 1/2 the weight of the factory 2-piece. The shaft features...

Driveshaft Shop NISSAN S14 with KA24 SR20 (5-Speed) Non-ABS Steel driveshaft

Product Description S14 Non-ABS with KA24/SR20 5-Speed Steel Shaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the...