LINK ECU

LINK

Link ECU - G5 Voodoo Neo 6

  The G5 Voodoo Neo 6 can run :   6 cylinders with staged sequential injection, dual high pressure fuel pumps and direct spark, or an 8 cylinder as sequential only with DI* or Port, and direct spark.   Highlights...

LINK

Link ECU - G5 Voodoo Neo 4

The G5 Voodoo Neo 4 can run: 4 cylinders with staged sequential injection, a single high pressure fuel pump and direct spark, or a 6 cylinder as sequential only with DI* or Port, and direct spark. Highlights for both versions ( Neo...

LINK

LINK ECU TCC08 8 Channel EGT to CAN Module

Link TCC08 8 Channel EGT to CAN module, powered by CAN checkedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values ​​via CAN bus and/or monitor them directly on your wireless enabled device...

LINK

LINK MIPS 150PSI Pressure Sensor 1/8 NPT

Media Isolated 150PSI/10 Bar Pressure Sensor, 1/8 NPT The MIPS 150PSI/10 Bar Pressure Sensor features a durable stainless steel construction and is designed for compatibility with various fluids, including oil, petrol, and water. Features:•...

LINK

LINK ECU TCC04 4 Channel EGT to CAN Module

Link TCC04 4 Channel EGT to CAN module, powered by CAN checked  The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device...

Touge Factory

Remote Mount Bracket MAP Sensor and Pressure Sensors

Remote mount bracket for LINK 4 Bar sensor, and two pressure sensors.We designed this compact mounting setup to keep the engine bay neat and tidy while keeping the sensors secure and away from heat and vibrations.Can mount directly to a flat surface, or...

Rywire

RyWire Harness Link ECU

The Rywire K-Series LINK G4 engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!   If you are building a Front (or all) wheel drive race car...

LINK

LINK ECU DI Driver-4

  LINK ECU DI Driver-4 (144-5000) Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost effective and integrated solution, designed to give you full...

LINK

LINK ECU G5 ECU Plug-In - GT86/BRZ/FR-S

LINK ECU G5 ECU Plug-In - GT86/BRZ/FR-S (241-4000): The GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning...

LINK

LINK ECU CANJST - CAN Connection Cable for Plugin ECU's (5pin)

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other...

LINK

LINK ECU EX Expansion Loom (XSL)

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent on the...

LINK

LINK - 10m 4 Core CAN Wiring

LINK - 10m 4 Core CAN Wiring (101-0312) Useful for wiring in CAN Accessories Four internal wires (White, Green, Red, Black) in a PVC outer jacket. Internal Wire Spec: FLRRY 0.5mm² (20 AWG) Outer Jacket Spec: PVC, OD 6.1mm