E90/91/92 LSx Swap

Energy Suspension

Energy Suspension Polyurethane Transmission Bushing

Polyurethane transmission bushing for the 8hp to E9x mount.We used this poly trans mount between the aluminum 8hp mount to the E9x chassis mount.

Touge Factory

E9x M3 Control Arm + Rear Subframe Roll Center and Arm Conversion Kit + Meyle Bearings

For those looking to refresh your suspension on the E9x using M3 arms, this is the complete kit you will need.Trusted MEYLE OE style spherical bearings with Kinematic Designs Spherical bearing conversion kit.

Touge Factory

E9x Roll Center Correction + Rear Control Arm Offset Spherical Bearing Conversion Kit

This kit by Kinematic Designs allows you to convert your E9x to all OE style spherical bearings.The roll center correction spacers install directly over OEM tie rods and control arm for bump correction. Simple to install, affordable and improves...

Touge Factory

Kinematic Designs Rear Camber Arm Inner Bearing Upgrade (Offset) - M2/M3/M4 (G8X, F8X, E9X)

Kinematic Designs E9X Offset Camber Arm Spherical Kit Fits: E9X chassis (all models using OEM-style rear camber/spring arms)     Rear geometry—refined. The Kinematic Designs Offset Camber Arm Spherical Kit replaces the factory...

Touge Factory

Kinematic Designs E9X Front Roll Center & Bumpsteer Correction Kit (RCBS)

The Kinematic Designs Front Roll Center & Bumpsteer Correction Kit (RCBS) is a precision-machined solution for lowered BMWs and Supras that restores proper suspension geometry by correcting both roll center and bump steer with OEM components. The...

Touge Factory

Kinematic Designs E9x Stainless Steel Tapered Washer Set for Rear Spherical Conversion

Kinematic Designs E9X Rear Tapered Washers for Press-In Spherical Conversion Kit for OEM M3 Arms Fits: E9X M3 & E9X & E8X with M3 rear upper arms (camber & guide rod) Upgrade your E9X rear suspension the smart way—with precision,...

Improved Racing 8hp70 Thermostatic Transmission Oil Adapter

Type a description for this product here...

MaxxECU

MaxxECU - RACE with LSx Plug and Play Harness with 8HPxx Trans Harness

This is the harness we used for our E90/E91/E92 LSx swap.MaxxECU makes your LSx swap simple especially if you are using a 8HP trans like us.

Improved Racing

Low Profile Oil Cooler Thermostat for LS Engines

Uses factory bypass port above oil filter to add oil cooler ports to GM LS engines. Built-in thermostat accelerates warm-up and maintains a minimum oil temperature in most conditions. Low-profile design maximizes header clearance. Optional plug...

LSe90

LSE9x Billet Oversized Power Steering Pump Pulley

Underdrive your e9x power steering pulley to keep stock BMW power steering pump rpms with the larger diameter LS crank pulley. Useful for high rpm applications like drag racing, drifting and road racing where extended high rpm and stock overdriven setup...

LSe90

LSE9x Billet Rear Trailing Arm Set

Lse9x HD billet rear trailing arm set replaces the factory flexible sheet metal trailing arms. The complex 5 arm suspension systems found on e9x and e8x cars will experience drastic alignment changes under power if any component deflects under power...

Guru Autowerks Dodge 8HP70 Transmission Mount - Universal

Guru Autowerks 8hp70 transmission mount.