Derale Performance Dual Fan Controller
Very easy install. Just push in the probe between the fins of the radiator where it measures the temperature.
-Rated at 35 amps per fan
-Adjustment Turn-on range from 150*F- 240*F
-Activates fan #1 at adjusted temperature
-Activates fan #2 at 10* warmer than fan #1
-Turn-off temperatures at 10*F below turn-on temperatures
-Die cast aluminum housing
-A/C override circuit built-in
**MADE IN USA**
Quick view
Derale
Derale Performance Dual Fan ControllerThis kit comes with a 3/8" NPT thread-in probe sensor. -Rated at 35 amps per fan-Adjustment Turn-on range from 150*F- 240*F-Activates fan #1 at adjusted...
Quick view
Derale
These Derale Cooling Products Hyper-Cool remote fluid coolers with fan kit provides the largest temperature drop of any fan-mounted cooler. Their unique fin and plate design maximizes heat...
Quick view
ISR
ISR Radiator Fan Mounting Kit Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted...
Quick view
ISR
ISR Performance 12" Electrical Radiator Fan ISR 12" Radiator Fan. Works great with SR20DET swaps and any 240sx needing an electric fan kit. We reccomend 2 - 12" Fans for 240sx/SR Radaitors...
Quick view
SPAL
Disclaimer: Please note, we recommend the "Related Products" shown below in the operation of this fan. Because of the inrush and high normal current draw of the AP90 Series fans, they are not...
Quick view
Koyo
This is a Koyo dual pass JZX100 aluminum radiator with an aluminum fan shroud kit.Benefit of running a JZX100 radiator in a JZX90 is that it is larger then the 90 radiator.Shroud kit will come with...
Quick view
Mounting Surface Required 15.5 x 26.5 x 4.00
Quick view
This dual fan setup fits great on the SR20DET and KA24DE radiators!Comes with two puller fans and a shroud. Keeps the engine bay looking clean! Mounting Surface Required
Quick view
This dual fan setup fits perfectly on the SR20DET and KA24DE radiators!Comes with two puller fans and a shroud.This is a low profile setup, which is only 2-5/8" deep total!Keeps the engine bay...
