Description
The 2JZ-GE manifold has been designed for guys wanting up to 900hp whilst keep as much response as possible.
**Compatable with: VVTI, Non VVTI and 1JZ GE**
Very easy access to all the nuts to reduce install time and cursing. All OEM fasteners can be used.
This manifold will accept turbos using a 50-55mm V-band inlet from as little at a G25-550 to G35-1050 to 6466 to 6870 all the way to a massive Xona 115-69 (1200hp) Turbos.
The wastegate port also uses our 44/45/46mm flanges to make it easy to source a wastegate, but to also allow for different designs, the manifold if you cut the standard flange off and weld a 50mm flange on will flow the full amount of a 50mm wastegate.
