Accessories

Racer X Fabrication

Racer X Fabrication GR COROLLA THROTTLE BODY INLET FLANGE

Racer X Fabrication GR COROLLA THROTTLE BODY INLET FLANGE (070901) (1) Racer X Throttle Body Inlet Flange

Racer X Fabrication

Racer X Fabrication GR COROLLA COLD PIPE TEMP SENSOR

Racer X Fabrication GR COROLLA COLD PIPE TEMP SENSOR (070902) (1) Racer X Cold Pipe Temp Sensor 

Racer X Fabrication

Racer X Fabrication GR COROLLA OIL CAP

Racer X Fabrication GR COROLLA OIL CAP (070013) The Racer X Fabrication oil cap for the 2023+ Toyota GR Corolla will clean up your engine bay and look great!! CNC machined right here at Racer X Fabrication from 6061-T6 aluminum and uses a viton o-ring...

Racer X Fabrication

Racer X Fabrication GR COROLLA ENGINE PITCH MOUNT

Racer X Fabrication GR COROLLA ENGINE PITCH MOUNT (070001) The Racer X Fabrication engine pitch mount for the 2023+ Toyota GR Corolla was designed to reduce engine rotation. The OEM pitch mount uses a fairly soft rubber bushing, which allows for...

Racer X Fabrication

Racer X Fabrication GR COROLLA THERMOSTATIC ADAPTER PLATE

Racer X Fabrication GR COROLLA THERMOSTATIC ADAPTER PLATE (0X1004-GRC) The Racer X Fabrication thermostatic oil adapter plate kit for the 2023+ Toyota GR Corolla is available as a separate kit for those that would like to build their own oil cooler kit...

Racer X Fabrication

Racer X Fabrication GR COROLLA CATCH CAN

Racer X Fabrication GR COROLLA CATCH CAN (0X1003-GRC) The Racer X Fabrication catch can for the 2023+ Toyota GR Corolla was designed to reduce oil in the air stream when exiting the PCV. The catch can / air oil separator works by intercepting the air...

HKS

HKS Dry Carbon Engine Cover - Toyota GR Corolla 2023+ / GR Yaris 2021+

Most engine covers serve as an aesthetic garnish to hide the clutter in the engine bay.HKS designed their cover to increase air flow to lower under hood temps and dress up the engine bay. Concept- This is a performance & custom part that replaces...

AFE

aFe Toyota GR Corolla L3 - 1.3L (T) Scorcher GT Power Module

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides...

HKS

HKS Head Studs Kit for G16E-GTS

HKS Head Studs Kit for G16E-GTS (hks22999-AT001) Strengthened head stud bolts for GR YARIS' G16E-GTS engineare now available to further enhance the sealing effect of theGROMMET HEAD GASKET, which is already available for G16E-GTS engine with high...

HKS

HKS Step 3 BCD Piston & Conrod Kit for G16E

HKS Step 3 BCD Piston & Conrod Kit for G16E (hks21004-AT007) A strengthened piston kit for G16E-GTS as acountermeasure against the weak point of it.With the same weight balance ratio of 50% asthe stock unit with the set of reinforcedconnecting rods,...

Radium Engineering

Radium Engineering Toyota GR Corolla Catch Can Kit Fluid Lock

Single catch can kit for the 2023+ Toyota GR Corolla. Installs on the crankcase vent line. Installation instructions avaliable at www.radiumauto.com

Cusco

Cusco Oil Catch Can Kit 23+ Toyota GR Corolla (GZEA14H) only 0.6L Capacity w/ 15mm Hose ID

Cusco Oil Catch Can Kit 23+ Toyota GR Corolla (GZEA14H) only 0.6L Capacity w/ 15mm Hose ID