Description
By popular demand, we have made a complete bolt-in oil catch can for the S13 SR20DET.
This kit includes our baffled catch can with -10AN fittings, lines and DEI Fire sleeve with all fittings and clamps. All you have to do is remove the original fittings.
The purpose of an oil catch can is to catch the rerouted oil and other contaminants expelled from the PCV Valve before entering the combustion chamber which can cause knock or pre-ignition.
Our oil catch cans are baffled and filled with stainless steel fine mesh wool to allow air and oil to separate and prevent oil from sloshing around, and even reduce the chance of oil spraying out of the filter.
Properly designed oil catch cans reduce carbon build-up on the valves, which can ultimately hinder engine performance.
Our oil catch can is specifically designed to fit directly under the wiper motor in the engine bay for LHD S13/S14.
This location is on the oil filter side of the KA/SR. is out of the way and is aesthetically pleasing.
It comes with 2 -10AN fittings with an easy to see fluid level tube and also an easy-drain plug that you can easily drain without removing the catch can from the engine bay.
Our catch cans have a 1.35 quart of fluid capacity and each catch can is hand-made and checked for leaks prior to shipping.
***Valve cover not included.
