Description
When you lower your Cressida to a respectable ride height, you'll want to correct the front lower arm geometry. Our 6061 Aluminum RCA's (roll center adjusters) will help to put the front lower control arm back to the correct geometry. This will help a lot with bump steer and a bit with camber change under compression.
Our RCA's are CNC'd from 6061 T6 Aluminum then nickel plated and finished off with steel locator sleeves pressed in to keep the knuckles and spindles aligned. We also include the bolts and washers required for the installation.
Kit includes:
2 RCA's with steel locator sleeves, 32mm tall (1.25")
4 Longer Knucle/RCA bolts
4 locking washers
