Shifter & Selector Rod

GKTech

Strike Fast 350Z / 370Z CD009 CDx Shifter Relocation Kit

DESCRIPTION CDx Shifter relocation kit places the shifter about 3" further back then OEM shifter position in the S-chassis with our Kswap Kit.  Shifts feel smooth and precise.Reverse lock out is done via press of a button on top of the shifter...

Touge Factory

TF-Works 7075 FRS / BRZ Shifter Selector Rods - KSwap to ZF Trans

The selector rods are required to connect the shifter to the ZF Trans.Our aviation grade 7075 aluminum selector rod is designed specifically to work with our FRS / BRZ shifter mount.  Using our engine and trans mounts, there is no fabrication needed...

Touge Factory

S13 / S14 Kswap Shifter Kit with Billet Aluminum Adapter Plate - Short

Short version is 2" shorter then the standard, placing the shifter near stock location.  This shifter kit is designed to work with our K-swap engine and trans mount kit.The billet aluminum adapter plate allows you to chassis mount the shifter using...

Touge Factory

TF-Works S13 / S14 Shifter Selector Rods - K Swap to ZF Trans

The selector rods are required to connect the shifter to the ZF Trans.Our aviation grade 7075 aluminum selector rod is designed specifically to work with the S13 / S14 trans tunnel and shifter mount.  Using our engine and trans mounts, there is no...

Touge Factory

S13 / S14 Kswap DIY Steel Shifter Plate

This steel shifter plate bolts into the OEM shifter retainer ring provision, covering up the large opening so you can run a shifter of your choice.The center opening is 3-3/8".

Touge Factory

S13 / S14 Kswap Shifter Kit with Billet Aluminum Adapter Plate - Long

This shifter kit is designed to work with our K-swap engine and trans mount kit.The billet aluminum adapter plate allows you to chassis mount the shifter using the OEM s-chassis shifter retainer ring provisions.This will work for both 5spd and 6spd...