Description
Description
ZSpeed CMAK V3 Clutch Movement Alteration Kit CSC Clutch Slave Cylinder CSC Delete Kit
Nissan Infiniti 370Z G37 G35S Q60
Made In USA!
If your 370Z G37 G35S clutch slave cylinder has failed or blown out, you know how expensive it can be to do multiple times! Never worry about it again with the ZSpeed CMAK Retrofit kit!
This kit is very simple to install, it literally takes only a few minutes once transmission is removed!
ZSpeed Performance CMAK Deletes the internal Concentric Clutch Slave Cylinder also know as a “CSC”.
CMAK Replaces the OEM CSC with a Heavy Duty Clutch Fork Assembly with an Externally mounted premium Clutch Slave Cylinder. This slave can be changed without removing the transmission quickly and easily if ever needed.
All kits Include a ZSpeed Rubber Dust Boot This boot completely seals of the outside elements like Water, Dirt and Debris. If there is no boot on the bellhousing and instead an aluminum cover like some kits , the clutch, flywheel and input shaft can rust and cause issues.
- Works with virtually all “properly built” OEM and aftermarket single disk clutch kits.
- Retains same pedal pressure, stroke and feel as the OEM internal CSC (concentric clutch slave)
EASY to install, Quick and Painless 100% BOLT ON! No Adjustments, No Measurements, No Modifications needed!
No Pesky, Time consuming Set-up Measurements unlike other CSC Elimination kits on the market that require constant adjustments over time.
- Zspeed CMAK CSC Delete automatically adjusts for clutch wear
- Includes ZSpeed Rubber Fork Dust boot to completely seal off the outside to inside of the trans from weather/debris.
- Once installed, you never have to touch it again!
- Does not increase pedal effort. Keeps hydraulic fluid clean = Less Maintenance, Reduces Master Cylinder Wear
- Retains Stock Release Stroke.
- High Strength Steel Full Length Fork and Pivot assembly with Bronze Bearing will never break or fail, No chance of Pivot Ball Failure!
- Heat treated steel bearing guide tube.
- Built Solid from the ground up this kit is by far the best on the market for your Z or G
- Replacement “wear” parts, Slave Cylinder & Release Bearing, are easily sourced from us, Nissan OEM or in the aftermarket!
ZSPEED CMAK V3 INSTALL
If you are not installing a new clutch at the same time as your new CMAK CSC Delete also change your clutch pilot bushing at the same time, These are notorious for making noise after removal of the transmission. TIP! > We recommend asking for your old parts from your mechanic to be sure it was changed!
Fits
- Nissan 370Z 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
- Infiniti G35S 2007-2008 Sedan
- Infiniti G37 ALL
- Infiniti Q60 2014-201
