Description
The TracTuff Remote Oil Filter Block Adapter is a universal product designed to relocate the oil filter to a more convenient location.
The block adapter has machined “IN” & “OUT” markings, -10 ORB inlet/outlet ports, and a filtered 3/8" NPT accessory port to add a sensor or supply clean oil to an accessory of your choice. The kit includes either -10 male flare port fittings, zinc platted steel 3/8" NPT plug, and an overbuilt billet stainless steel M22 x 1.50 banjo style mounting bolt.
The CNC machined 6061-T6 aluminum body measures in at 1.42" tall (1.89" including the bolt head), uses a 2.50" (63.5mm) o-ring/ gasket OD, and can be mounted to anything that has a M22 x 1.50 female thread and a 2.50" mounting pad; pretty much all popular Honda engines once the stud is removed. The block adapter can be rotated to point in any direction and once tightened (22 lb ft.) can be safety wired using the machined features on the bolt and body! If you don't already have a remote oil filter mount... I have an equally well thought out matching solution, be sure to check it out.
NOTE: On factory oil cooler equipped motors, simply remove the large bolt that holds the OEM oil cooler in place, disconnect, and plug the two coolant lines and your done! The block will have a larger thread than the oil filter did. If this is a K... I offer a simple solution to eliminate the coolant lines. Non oil cooler equipped motors just need the stud removed and the block will have a larger thread than the oil filter did.
