The selector rods are required to connect the shifter to the ZF Trans.
Our aviation grade 7075 aluminum selector rod is designed specifically to work with our FRS / BRZ shifter mount.
Using our engine and trans mounts, there is no fabrication needed if you use our steel adapter plate and shifter kit. Takes all of the guess work out.
Quick view
Touge Factory
The selector rods are required to connect the shifter to the ZF Trans.Our aviation grade 7075 aluminum selector rod is designed specifically to work with the S13 / S14 trans tunnel and shifter mount...
Quick view
Touge Factory
We are excited to release our FRS/BRZ Kswap kit. Our goal was to produce a kit for the guys that want the absolute best kit. We designed our RWD kit to cope with the demanding stress of the...
Quick view
Touge Factory
This steel shifter plate bolts into the OEM shifter retainer ring provision, covering up the large opening so you can run a shifter of your choice.The center opening is 3-3/8".
Quick view
Touge Factory
This shifter kit is designed to work with our K-swap engine and trans mount kit.The billet aluminum adapter plate allows you to chassis mount the shifter using the OEM s-chassis shifter retainer ring...
Quick view
Touge Factory
Short version is 2" shorter then the standard, placing the shifter near stock location. This shifter kit is designed to work with our K-swap engine and trans mount kit.The billet aluminum...
