Suspension

REVSHIFT

12mm Differential Studs and Spacers - BMW E30 / E36 318ti / Z3 (REVSHIFT)

Description: These studs and spacers mount the differential 12mm from the subframe. They are intended to be used with our 12mm offset subframe bushings for the BMW E30, E36 318ti, and Z3. When raising the subframe, the spacers allow the differential to...

Rear Shock Mounts - E30, E36, E46, Z3, Z4 - (REVSHIFT)

Description: Revshift rear shock mounts are CNC machined from 6061 billet aluminum. They are fitted with our highest quality 80A street hardness polyurethane bushings and chromoly steel inserts. The class 10.9 hardware is zinc plated for corrosion...

REVSHIFT

Rear Subframe Bushings - BMW E30 (REVSHIFT)

Description: These polyurethane bushings will stiffen the rear subframe. They are available in "stock height" to retain the stock suspension geometry or "12mm" to raise the subframe to correct severe negative camber by roughly 4 degrees. Fits all...

REVSHIFT

Rear Trailing Arm Bushings - BMW E30 / E36 318ti / Z3 / E21

Description: Revshift polyurethane rear trailing arm bushings completely replace the oem rubber bushings on all BMW E30 models, E36 318ti, Z3, and E21. These bushings stiffen the rear trailing arms improving the vehicles handling capabilities...

REVSHIFT

Differential Bushing - BMW E30 / E36 318ti / Z3 (REVSHIFT)

Description: This differential bushing will fit all BMW E30 models, E36 318ti, and Z3. Revshift bushing lube included. Lifetime warranty Hardness80A Street (Black): Slightly stiffer and stronger than OEM rubber. No increase in NVH. Great choice as an...

REVSHIFT

Control Arm Bushings - BMW E30 / E36 / Z3 (REVSHIFT)

Description: Revshift control arm bushings will fit all BMW E30 models, E36, and Z3. These will also fit the E46 XI models (AWD E46 only). Revshift bushing lube included. Sold as a pair. Lifetime warranty Hardness80A Street (Black): Slightly stiffer...

REVSHIFT

Offset Control Arm Bushings - BMW E30 / E36 / Z3 (REVSHIFT)

Description: Revshift offset control arm bushings will fit all BMW E30 models, E36, and Z3. Offset control arm bushings came stock on the E30 M3 and 1995 M3. Non-M3 E30's and E36's benefit from these bushings because they increase the caster and improve...

REVSHIFT

Rear Bushing Kit - BMW E30 (REVSHIFT)

Description: This polyurethane rear bushing kit will fit all BMW E30 models except the xi. The kit includes:1x differential bushing2x subframe bushings with new top washers4x trailing arm bushingsRevshift bushing lube Lifetime warranty * The...

Touge Factory

BMW E30/E36/E46/Z3 Rear Strut Tower Reinfocement Plates - Stainless Steel

Rear shock towers on BMW's are a known weak point, and highly recommended they be reinforced when going with stiffer shocks or true coilovers.These can be used to repair or used as reinforcement.Plates are precision laser cut, which can be welded in or...

Condor Speed Shop

Condor Speed Shop Solid Conversion Control Arm Mounts - E46 Conversion for E30 & E36

Swapping in E46 control arms into your E30 or E36 significantly increases negative camber by widening the track width and also gives you more clearance for more steering angle. Our CNC machined control arm brackets are made from solid steel and are...

Condor Speed Shop

Condor Speed Shop Control Arm Bushings - E46 Conversion for E30 & E36

These control arm bushings are specifically designed for the e30 & e36 chassis. Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more...

SuperPro

SuperPro Polyurethane Steering Coupling Bush Kit - BMW E30

Replaces old soft rubber coupling with new much more rigid polyurethane coupling.-Reuse all oem hardware.