Steering

GKTECH - OFFSET STEERING RACK EXTENDERS (S13/S14/S15/R32)

The GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of...

ISR

ISR Performance -6an High Pressure Power steering line fitting with o-ring - 240sx

ISR Performance -6an High Pressure Power steering line fitting with o-ring - 240sx This is the same high quality fitting that are sold with our ISR Performance high pressure power steering line kit. Legal only for use in competition vehicles which...

P2M

P2M Nissan 240sx High Pressure Power Steering Hose - SR20DET / KA24DE

P2M high pressure power steering hose utilize a -6AN stainless steel braided PTFE hose with black external sleeve for additional protection.  The line was built to replace the factory high pressure line in the 240SX installed with Nissan SR20 or...

P2M

P2M Nissan 240sx High Pressure Power Steering Hose (GM LS Motor)

P2M High pressure power steering line is a OEM direct fit for 240sx with LSx engine swaps.The rubber line is easily damaged, and this will also assist with allowing the pump to function more efficiently.

ISR

ISR Performance Inner Tie Rods - 89-98 Nissan 240sx S13 S14

ISR Performance Inner Tie Rods - 89-98 Nissan 240sx S13 S14 ISR Performance Inner Tie Rods are strengthened for improved durability and increase steering angle at full lock. These tie rods are designed to be a stronger and more reliable upgrade compared...

ISR

ISR Performance High Tensile Strength Offset Steering Rack Spacers S13 S14

ISR Performance High Tensile Strength Offset Steering Rack Spacers S13 S14 Offset Steering Rack Spacers are a simple way to overcome steering bind, With aftermarket knuckles this problem is more common. Normally you would have to relocate your...

GKTech

GKTECH S14 / S15 40mm Front Roll Center Correction Kit / Angle Kit

The GKTECH roll center correction kit is CNC machined from 7075-T6 aluminium and provides 40mm of roll center correction, 40mm of bump steer correction and also re-positions the steering arm to increase steering lock. The roll center correction kit...

Touge Factory

TF 240SX S13/S14 Inner and Outer Tie Rod Set (Circuit Sport) - Version 2 with Aurora Bearings

New Version 2! Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry.The outer tie rod design with the taller shank relocates the pivot point, which also reduces binding and leading to premature failure.The...

Touge Factory

TF Extended Outer Tie Rods V.2 with Aurora Bearing - Nissan 240SX S14 & S13

Extended outer tie rods are longer then stock by 1.5"  Recommended to be used with modified and/or shortened knuckles with increased steering angle. Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry...

Touge Factory

TF Outer Tie Rods V.2 w/ Aurora Bearing Rod End - Nissan 240SX S14 & S13

New Version 2! Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry.The outer tie rod design with the taller shank relocates the pivot point, which also reduces binding and leading to premature failure. The...

ISR

ISR Performance Stainless Steel Power Steering Rack Lines - 240SX LHD S13/S14

ISR Performance Stainless Steel Power Steering Rack Lines Nissan 240sx S13/S14 LHD Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted...

Energy Suspension

Energy Suspension Polyurethane Steering Rack Bushing - Nissan 240SX S13 S14 Z32

This is a polyurethane steering rack bushing kit for the Nissan 240SX and 300ZX.It is a 3 piece kit, however you only use two depending on your chassis.The stock bushings are rubber, and most likely they are dry rotted making the steering feel sloppy...