Lines & Fittings

Touge Factory

Stainless Steel Braided 4AN Hose - Straight + 90 Degree End (42 inch)

PTFE lined stainless steel braided line.4 AN Hose.4 AN Straight Female to 4 AN 90 Degree Female42" in length.

Touge Factory

Stainless Steel Braided 4AN Hose - Straight + 90 Degree End (30 inch)

PTFE lined stainless steel braided line.4 AN Hose.4 AN Straight Female to 4 AN 90 Degree Female30" in length.

Touge Factory

Stainless Steel Braided 4AN Hose - Straight + 90 Degree End (16 inch)

PTFE lined stainless steel braided line.4 AN Hose.4 AN Straight Female to 4 AN 90 Degree Female16" in length.

Garrett

Turbo Oil Return Drain Hose Kit - Garrett GT / GTX Turbos / G Series - Black

If you're using one of Garrett's GT or GTX Turbos, this is a easy solution for an oil drain/return kit.High Temp Special Rubber Hose for oil return (oil Drain) 5/8" (-10 equivalent inner diameter), now available in BLACKNext best alternative to using...

Touge Factory

Stainless Steel Braided 4AN Hose - Straight + 90 Degree End (24 inch)

PTFE lined stainless steel braided line.4 AN Hose.4 AN Straight Female to 4 AN 90 Degree Female24" in length.

MAC

Mac Valve Solenoid with Brass Fittings and Filter + Billet Mount

Genuine MAC Valve 35A-AAA-DDBA-1BA This is the same 3 Port MAC valve used by all the EFI Manufactures for boost control.  3 Port (3/2 valve) 12V Coil 5.4 WattsIncludes 2 barb fittings and filter + Billet aluminum mount

MAC

Mac Valve Solenoid with Brass Fittings and Filter

Genuine MAC Valve 35A-AAA-DDBA-1BA This is the same 3 Port MAC valve used by all the EFI Manufactures for boost control.  3 Port (3/2 valve) 12V Coil 5.4 WattsIncludes 2 barb fittings and filter

Garrett

Turbo Oil Return Drain Hose Kit - Garrett GT / GTX Turbos / G Series

If you're using one of Garrett's GT or GTX Turbos, this is a easy solution for an oil drain/return kit.High Temp Special Rubber Hose for oil return (oil Drain) 5/8" (-10 equivalent inner diameter), Price Per Foot. Next best alternative to using steel...

ATP

Low Profile Banjo -3AN Turbo Oil Feed Stainless Steel Line Kit (48") with Restrictor

PRODUCT DESCRIPTION: Low profile oil inlet (oil feed) -3AN LINE Kit for GT25R through GT35R (or GTX28 through GTX35) series turbochargers. 48" line length with integrated banjo. Includes standard banjo bolt with 0.035" diameter restrictor for ball...

ATP

Turbo Oil Feed Stainless Steel Line (-4AN)

PRODUCT DESCRIPTION: -4AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x straight fitting). NOTE: Two straight hose end fittings are available as an...

Garrett

-4 size Oil Inlet Fitting with Built-In .035 Restrictor for Garrett Ball Bearing Turbos

Product Description: -4 (-4AN) Size oil inlet restrictor fitting (0.035" orifice / hole size) for Garrett GT and GTX Ball Bearing Turbochargers. Output is -4AN male flare. High durability and reusable Stainless Steel material.   Use...

Garrett

Garrett Turbo Aluminum Oil Drain Flange for GTX, GT Turbos

Product Description: Billet aluminum oil drain flange (oil return flange) for Garrett GT ball bearing series, Garrett GTX ball bearing series (specific model compatibility below) and T25 / T28 Non-ball bearing turbochargers. Threaded for a 1/2 inch NPT...