Fabrication / DIY

Jeremy - HKS Ergoster x 2 + R33 Rails

Vibrant

OPEN

Vibrant

Vibrant Air-to-Air Intercooler Core (Core Size: 25"W x 12"H x 3.25"thick)

Intercooler Dimensions----------------------Core Width: 25"Core Height: 11.80"Core Thickness: 3.5"Intercooler Specifications:---------------------------Approx. HP Rating for this intercooler: 875 HP 

Vibrant

Vibrant Air-to-Air Intercooler Core (Core Size: 22"W x 9"H x 3.25" thick)

Intercooler Dimensions----------------------Core Width: 22"Core Height: 9.25"Core Thickness: 3.25"Intercooler Specifications:---------------------------Approx. HP Rating for this intercooler: 550 HP

Vibrant

Vibrant Air-to-Air Intercooler Core (Core Size: 18"W x 6.5"H x 3.25"thick)

Intercooler Dimensions----------------------Core Width: 17.75"Core Height: 6.5"Core Thickness: 3.25"Intercooler Specifications:---------------------------Approx. HP Rating for this intercooler: 350 HP 

Vibrant

Vibrant Check Valve w/ Integrated -8/-10AN Male Flare Fittings

Vibrant Performance offers a comprehensive selection of Adapter Fittings to help complete almost any project. These adapters are suitable for use with any manufacturers hose end fitting. Available in Anodized Black finish only.

Vibrant

Vibrant Low Restriction Inner Silencer (3.90" O.D. Baffle)

- Sized to fit inside tip used on Vibrant Part #1058, #1059, 1061 and 1062 and all TPV TURBO Exhaust Systems.- Baffle measures 3.90" Outside Diameter. Will fit in any single wall exhaust tip with an Inside Diameter of 3.85" to 3.90".- 2.5" O.D. Tuning...

Vibrant

Vibrant Exhaust Hanger Rod Clips - 2 Pack

A simple solution for a common problem. Universal Hanger Rods are rarely sized to match the width of the rubber exhaust hanger, allowing the exhaust to slide back and forth unnecessarily.Vibrant's new Hanger Rod Clips help solve this problem by bridging...

Vibrant

Vibrant Stainless Steel Seal Clamp (4" OD Tubing)

Vibrant Performance Stainless Steel Exhaust Seal Clamps provide for superior clamping and sealing of overlap joints without permanently distorting the tubing.

Vibrant

Vibrant Stainless Steel Seal Clamp (2.75/3/3.5" OD Tubing)

Vibrant Performance Stainless Steel Exhaust Seal Clamps provide for superior clamping and sealing of overlap joints without permanently distorting the tubing.

Vibrant

Vibrant Stainless Steel Seal Clamp (2/2.25/2.5" OD Tubing)

Vibrant Performance Stainless Steel Exhaust Seal Clamps provide for superior clamping and sealing of overlap joints without permanently distorting the tubing.

Vibrant

Vibrant Easy Seal Exhaust Sleeve Clamp

Genuine Torca Easy Seal Exhaust Sleeve Clamps- Allow for quick, easy and effective clamping of same sized tubing.- These clamps now offer superior clamping strength and there is no need to separate pipes before clamping.- Clamps measure 3-1/2" long