Description
Complete front Essex Designed AP Racing Radi-CAL Competition Brake Kit for the R35 Nissan GT-R.
- Clears OEM 20" wheel without a spacer, and can fit behind 18" Forgelines
- Features AP Racing CP9668 Radi-CAL Pro5000R six piston calipers
- 390x36mm, 84 vane AP Racing disc
- Saves 11 unsprung lbs. from nose vs. OEM brakes
- Every component designed to resist the heat of extended track sessions
- Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
- Designed to work with OEM rear brakes
Fits: Front (2010 Nissan GT-R (R35) All)
Advantages Over OEM Brake System
Our CP9668/390mm Radi-CAL Competition Brake Kit offers our customers the following advantages over the OEM brake system:
- Approximately 11 lbs. of unsprung weight reduction from the nose of the car
- AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
- CP9668 calipers use a 25mm thick, commonly available brake pad shape
- Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
- Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
- Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
- Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
- High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
- No dust boots to burn up
- Simple pad change with two bolts or quick-change spring clip, no caliper removal required
- Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
- Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
- Championship winning, 84 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
- Anti-knockback/anti-rattle disc attachment hardware
- Replacement iron disc rings available at an extremely competitive replacement price
- Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
- Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design
|
Model Year |
2009-11 |
2012-17 |
|
|
Essex/AP BBK |
OEM |
OEM |
|
|
Caliper |
CP9668-2S4L/3S4L |
||
|
Weight no Pads |
6.9 lbs. |
9.0 lbs |
9.0 lbs. |
|
27.0mm x 2 |
|||
|
Piston Sizes |
31.8mm x 2 |
||
|
38.1mm x 2 |
|||
|
Piston Area |
50.1cm^2 |
||
|
Inlet Thread |
M10x1.0 |
||
|
Mounting Type |
Radial |
||
|
Mtg. Centers |
180mm |
||
|
Mtg. Offset |
42mm |
||
|
Pad thickness |
25mm |
18.8mm |
|
|
Disc |
CP4284-134/135GC |
||
|
Type |
2-piece floating |
||
|
Weight |
19.3lbs. |
25.0 lbs. |
26.0 lbs. |
|
Diameter |
390mm |
380mm |
390mm |
|
Thickness |
36mm |
34mm |
32.8mm |
|
Radial Depth |
54mm |
66mm |
66mm |
|
No. of Vanes |
84 |
